Working principle

The main motor drives the grinding plate by the reducer, simultaneously the hot air enters the vertical mill body from the air inlet and the materials drop on the grinding plate center from the feed opening and evenly move outwards due to centrifugal force.

The materials are ground by grinding rollers when passing through the grinding area on the grinding plate, and large size materials will be directly crushed while the fine materials will form a material bed by extrusion for further inter granular crushing.

The crushed materials will continue to move towards the mill edge until being taken away by the strong air flow at the vane and collected by the dust collector, while larger material particles will again fall onto the grinding plate for repeated grinding; the coarse particles in the air flow will drop back onto the grinding plate for further grinding when passing through the upper separator under the action of the rotor blade, with the qualified fine powder flowing out of the grinding plate with the air flow and then collected and discharged by the system powder collector as finished powder product.

However, the iron blocks and other wastes mixed in the materials will move along with the materials towards the edge of the grinding plate due to their own weight and fall into the lower chamber and then be discharged out of the slag discharge opening by the scraping plate at the bottom of the mill tray (commonly known as scumming).